ASP.NET Core and MVC 6 Lessons Learned

I recently finished a small website using ASP.NET Core and MVC 6 - I only scratched the surface of the framework, but here's some gotchas and things I picked up along the way. If you're entirely unfamiliar with ASP.NET Core and MVC 6, it might be a good idea to read up a bit on that first.


node_modules Folder

The default project.json contains the following:

"exclude": [

…defining folders to ignore when publishing the project. "Well" I thought, "I'm not using node, so I can clean that up a bit":

"exclude": [

That's better! Admittedly only OCD-better, but that still counts :p No point excluding the node_modules folder if there isn't going to be one, right?

Well, once I started using Gulp for CSS minification my project wouldn't build! I got this:


"The design time host build failed with the following error:" - with no further error details. With diagnostic build output I found a 'path too long' error as detailed here, and through that bug report I [eventually] figured out that the path in question waaaaaas… node_modules. Gulp had added node files in that directory and the compilation process was falling over when they were included in the build. Adding node_modules back into the exclude setting fixed it, but that took an annoying amount of time to figure out.

DI Concrete Types

I usually use StructureMap for DI, so I'm used to injecting concrete types into constructors without having to think about it. ASP.NET Core comes with its own built-in DI container, but it doesn't support concrete dependencies without them being configured. Like this!

public void ConfigureServices(IServiceCollection services)

…hardly a chore, but this was a very simple application. On anything of significant complexity I'll use StructureMap instead of the baked-in container.


The normal MVC /controller/action routing didn't work right out of the box (not that it usually does) so I added attribute-based routing like this:

public class ContactController : Controller
    public async Task<IActionResult> Send(ContactData senderData)
// Omitted
} }

…and that worked fine. But seeing as all my attributes were doing was setting up the default routes, I switched to setting up a default route in StartUp.Configure(), like this:

public void Configure(IApplicationBuilder app)
    app.UseMvc(routes =>
            name: "Default",
            template: "[controller]/[action]",
            defaults: new { controller = "Home", action = "Index" });

…but that didn't work. What? I changed it to the built-in default route method:

public void Configure(IApplicationBuilder app)

…and that didn't work either. I put the attributes back on, it worked. I removed them, it didn't. Eventually through some magical incantation of removing and re-adding route configuration - switching it off and back on again in other words - UseMvcWithDefaultRoute() worked without routing attributes. Not sure what happened there.


package.json is the configuration file used by Bower to manage dependencies Node.js needs to perform Gulp's client-side tasks (see the comments for clarification of this). As an aside I have a knee-jerk reaction against using different package managers for client- and server-side packages, but as client-side package management is already a task performed well by Bower, there's sense in using it instead of NuGet for that… I guess?

Anyway, package.json does not appear in Solution Explorer:


…you get to it like this:


…that wasn't terribly intuitive to me given that project.json (which contains the server-side dependencies) appears in Solution Explorer just fine. You can actually make package.json appear by removing the following line from your xproj file:

  <DnxInvisibleContent Include="bower.json" />
  <DnxInvisibleContent Include=".bowerrc" />
  <DnxInvisibleContent Include="package.json" /> <!-- This one! -->

...and I suspect doing so has no negative side-effects, but I don't know for sure, so I didn't bother.

Cool Stuff

Tag Helpers

Tag helpers are a less obtrusive alternative to MVC 5's many Html.Blah() helper methods, and IMO give you much cleaner view markup:

@* Helper method version *@
@Html.TextBoxFor(m => m.Subject, new { @class = "wide" })

@* Tag Helper version *@
<input asp-for="Subject" class="wide" />

You can read more about them at the link above, but I found adding attributes to standard markup much nicer than using the helper methods.

Transparent Azure Configuration

I'm hosting my project on Azure, and wanted to use the application configuration settings available in the portal. After a false start using CloudConfigurationManager (which NuGet installed quite happily but which didn't work at all) it turned out that an ASP.NET Core application hosted on Azure transparently uses the application settings if they're available. All I had to do was set up configuration in the standard way:

public class Startup
    public Startup()
        Configuration = new ConfigurationBuilder()
            .AddJsonFile("appSettings.json", optional: true)

    public IConfiguration Configuration { get; set; }

…and values are automagically pulled from Azure settings if they exist. Adding the Startup.Configuration property instance to the built-in DI container like this:

public void ConfigureServices(IServiceCollection services)

…makes IConfiguration accessible as an injected dependency, like this:

public class EmailSender
    private readonly IConfiguration _settings;

    public EmailSender(IConfiguration settings)
        _settings = settings;

    public async Task SendAsync(ContactData senderData)
        var localDomain = _settings["LocalDomain"];

…which saves you the task of abstracting your configuration - something I'm used to having to do. Neat! :)

Controller and View Discovery

I prefer to group project content by feature instead of in folders named Controllers, Models and Views, but doing that in MVC 5 means you have to tell the framework where to find controllers. Not so in MVC 6, which finds them wherever they are without fuss. Nice! The same unfortunately isn't true of Views, but it's pretty easy to re-configure:

In Startup.cs:

public void ConfigureServices(IServiceCollection services)
    services.Configure<RazorViewEngineOptions>(options =>
        options.ViewLocationExpanders.Add(new ViewLocationExpander());

...and in the ViewLocationExpander:

public class ViewLocationExpander : IViewLocationExpander 
    public IEnumerable<string> ExpandViewLocations(
        ViewLocationExpanderContext context,
        IEnumerable<string> viewLocations)
        return new[]
    } simply return an enumerable of strings containing possible View locations. That's it!

Overall I really enjoyed working with ASP.NET Core and MVC 6, and I look forward to putting it to work on a more complex project in future.

Print | posted @ Tuesday, March 15, 2016 10:45 PM

Comments on this entry:

Gravatar # re: ASP.NET Core and MVC 6 Lessons Learned
by Rob Prouse at 3/16/2016 5:46 PM

Great article. I am starting down the same path, so it is useful. Minor correction though, packages.json is not the Bower packages, it is the Node Package Manager (NPM) packages. The Bower packages are in Bower.json.
Gravatar # re: ASP.NET Core and MVC 6 Lessons Learned
by Steve Wilkes at 3/16/2016 6:22 PM

Cheers, Rob - glad it's useful :) packages.json lists Node packages required for client-side tasks; the list is *managed* using Bower - that's what I meant to say. Node modules use a bower.json to provide details about themselves to Bower, so you shouldn't have to worry about those unless you're writing a Node module. Probably :)
Gravatar # re: ASP.NET Core and MVC 6 Lessons Learned
by Charles Nurse at 3/24/2016 5:42 PM

I also had trouble finding package.json. Didn't find your solution but I did reveal it by using the "Show All Files" button in the Solution Explorer toolbar, with the relevant project selected. I like your solution better. Not sure why the default is hidden - I update package.json as often if not more often than project.json.
Gravatar # re: ASP.NET Core and MVC 6 Lessons Learned
by Steve Wilkes at 3/24/2016 6:00 PM

Yeah, I'm not sure what the logic is behind the decision to hide it either. Oh well - happy to help! :)
Gravatar # re: ASP.NET Core and MVC 6 Lessons Learned
by Steven Hall at 8/18/2016 5:42 PM

I had the same problem with routing being funky, and I asked on Stack Overflow. The answer is that you have to set attributes on both the class AND each action, or on neither. The other option is to put [action] in the class attribute, like: [Route("[controller]/[action]")]. Here's that SO question:
Post A Comment